Specification of Universal Ovens
MEMMERT,UN110 Universal Oven
Memmert UN110 Universal Oven merupakan oven yang digunakan dalam pengaturan suhu sesuai dengan kondisi yang diinginkan oleh pengguna atau metode yang sedang dijalankan. Oven menjadi hal yang sangat penting, khususnya dalam bidang laboratorium dimana dibutuhkan perlakuan pemanasan atau pengeringan terhadap suatu sampel. Tidak hanya di laboratorium, aplikasi heating oven dan drying oven juga banyak digunakan dalam ruang lingkup industri, seperti industri makanan dan industri lainnya. Karena itulah pengadaan alat-alat laboratorium di Indonesia seperti Oven Memmert menjadi hal yang harus terus dilakukan, khususnya oleh distributor Memmert yang terdapat di Indonesia.
Temperature |
Set temperature range in °C |
min. 5°C above ambient up to +300°C |
---|
Temperature |
1 Pt100 sensor DIN class A in 4-wire-circuit |
---|
Control technology |
Language setting |
German, English, Spanish, French, Polish, Czech, Hungarian |
Control COCKPIT |
SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
---|
Timer |
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
---|
Function SetpointWAIT |
the process time does not start until the set temperature is reached |
---|
Calibration |
three freely selectable temperature values |
---|
Adjustable parameters |
temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime |
Ventilation |
Convection |
natural convection |
Fresh air admixture |
adjustment of pre-heated fresh air admixture by air flap control in 10 % steps |
Vent |
vent connection with restrictor flap |
Communication |
Documentation |
programme stored in case of power failure |
Programming |
AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
Safety |
Temperature control |
adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
Autodiagnostic system |
for fault analysis |
Standard equipment |
Works calibration certificate |
Calibration at +160°C |
---|
Door |
fully insulated stainless steel door with 2-point locking (compression door lock) |
---|
Internals |
2 stainless steel grids |
---|
Stainless steel interior |
Interior |
easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
---|
Volume |
108 l |
---|
Dimensions W x H x D in mm |
w(A) x h(B) x d(C): 560 x 480 x 400 mm |
Max. number of internals |
5 |
---|
Max. loading of chamber |
175 kg |
---|
Max. loading per internal |
20 kg |
---|
Textured stainless steel casing |
Dimensions |
w(D) x h(E) x d(F): 745 x 864 x 584 mm |
Housing |
rear zinc-plated steel |
Electrical data |
Voltage Electrical load |
230 V, 50/60 Hz
approx. 2800 W |
---|
Voltage Electrical load |
115 V, 50/60 Hz
approx. 1800 W |
---|
Packing/shipping data |
the appliances must be transported upright |
|
---|
Customs tariff number |
8419 8998 |
---|
Country of origin |
Federal Republic of Germany |
---|
WEEE-Reg.-No. |
DE 66812464 |
---|
Dimensions approx incl. carton |
B x H x T: 830 x 1050 x 800 mm |
Net weight |
Approx. 74 kg |
---|
Gross weight carton |
Approx. 99 kg |
---|
|
|
---|
"Ventilation and Control"
- natural convection
- vent connection with restrictor flap
- adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
- self-diagnostics for fault analysis
- 1 Pt100 sensor DIN class A in 4-wire-circuit
- Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
- SetpointWAIT function - the process time does not start until the set temperature is reached
- AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software
- available as accessory (on demand).
- Setting of languages on ControlCOCKPIT: German/English/Spanish/French
- resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED)
- calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
- programme stored in case of power failure
- incl. works calibration certificate for +160°C